Item description
walimex pro Power Station
The compact energy pack from walimex pro is equipped with two sockets, so that you can connect one or two flashes and electric devices with maximal 1000W. Therefore you can e.g. connect two flash devices à 500W or one flash device with 1000W. The power supply unit can be charged via the cigarette lighter in your car or via the power network. The Power Station is fully charged after approx. 5 to 6 hours.
The compact Power Station informs you clearly about the current operating mode, e.g. charging. A cooling fan avoids overheating and therewith security and reliability.
walimex pro VC-300 Studio Flash
The walimex pro VC-300 Studio Flash is perfectly suited both for ambitious beginners and for professional photographers. The sturdy housing and well-engineered electronics ensure continuous operation even in toughest conditions. The quiet cooling protects your flash from failure due to overheating. Due to the clearly arranged LED display, all adjustments are easily visible and easy to read. The flash output and the modeling lamp can be adjusted steplessly and proportionally. You can trigger the flash via the sync cord or via the build-in photo cell (incl. pre-flash mode). Of course, photo cell and acoustic signal can be deactivated.
walimex WT-806 Lamp Tripod
The walimex WT-806 Lamp Stand 256cm is a high-quality solution for studio photographers. The extremely well-processed stand can be used portably and flexibly with a net weight of approx. 2.2kg and a transport size of approx. 109cm. You can use studio flashguns and reflectors up to a weight of 6kg on this stand. The spring suspension provides the necessary reliability when lowering the individual stand elements. With the standard spigot connection 5/8 inch and 1/4 inch thread the studio stand is suitable for all common studio flashguns and lights.
walimex Translucent Light Umbrella white, 84cm
The walimex Translucent Light Umbrella white 84cm provides your motif with even and soft illumination. The flexible alternatives for use and storage make it an ideal companion "on location". The translucent light umbrella is simply attached to the umbrella bracket of your studio flashgun.
walimex 4-Channel Remote Trigger Set CY-A
The 4-channel remote trigger set CY-A is a convenient upgrade for your studio flashguns. With it you can trigger your studio flashguns on 4 different channels even through walls or other obstacles which are in the way. If you assign each of your studio flashguns to a receiver, you can determine which studio flashgun should trigger with your camera using the selection of the channels. This of course requires the possibility of switching off the photo cell on your studio flashguns.
Includes
- 1x walimex pro Power Station, incl. car charger cable, power cable and connection cable for further power supply units
- 1x walimex pro VC-300 Studio Flash with shiny standard reflector, modeling lamp, flash tube, power cord, sync cord with 6.3mm jack phone, protection cap and a instruction manual
- 1x walimex WT-806 Lamp Tripod, 256cm with convenient carrying bag
- 1x walimex Translucent Light Umbrella white, 84cm
- 1x walimex 4-Channel Remote Trigger Set CY-A, contains 4-channel transmitter, 4-channel receiver, sync cable 3.5mm, adapter 6.3mm to 3.5mm and a 12V Battery
Technical specifications
| Power Station |
| Max. Continuous Output |
1000W |
| Charging Voltage AC |
100-240V |
| Charging Voltage DC |
12V (car cable) |
| Output Voltage |
100-240 V (AC) |
| Output Frequency |
220V 50HZ |
| Sockets |
2x |
| Voltage Curve |
sinus wave |
| Energy Efficiency |
85-87% |
| Accumulator |
plumb gel (built-in) |
| Quantity of Flashes |
VC-300: 900x
Bowens Gemini 250R: 1080x
Elinchrom BX 250RI: 960x
Profoto D1 250: 1050x |
| Charging Time |
5-6 hours |
| Fuse |
3 A |
| Dimensions (LxWxH) |
approx. 30x18x21 cm |
| Weight |
approx. 14 kg |
| Compatibility |
virtually usable for all flashes. Proved on: see below |
| VC-300 Studio Flash |
| Power Output |
300Ws |
| GN (1m/ISO 100) |
60 |
| Output Control Range |
full to 1/16 steplessly |
| Recycling Time to Full |
1~2s |
| Flash Duration |
1/800 ~ 1/1200 |
| Modeling Lamp Output |
150W |
| Triggering Method |
photo cell, sync cord, test button |
| Color Temperature |
5600K±200K |
| Flash Tube |
“plug- in” tube (user replaceable) |
| Triggering Voltage |
5V |
| Cooling Fan |
Yes |
| Auto Power Dump |
Yes |
| Power Source |
AC 220-240V 50Hz |
| Accessories |
Protection cap, reflector, power cord (4m), sync cord, modeling lamp, instruction manual |
| Weight |
approx. 2,5kg |
| Dimensions (without reflector) |
approx. 30x13x13cm |
| WT-806 Lamp Tripod |
| Max. Height |
approx. 256cm |
| Min. Height |
approx. 98cm |
| Transport Size |
approx. 109cm |
| Max. Load Capacity |
approx. 6kg |
| Weight |
approx. 2,2kg |
| Connection |
5/8 inch spigot with 1/4 inch thread |
| Material |
aluminium |
| 4-Channel Remote Trigger Set CY-A |
| Transmitter/Remote Control |
|
| Dimensions (LxWxH) |
approx. 5,5x5x3cm |
| Weight |
approx. 35g |
| Color |
black |
| Material |
plastic |
| Battery |
12V |
| Receiver |
|
| Dimensions (LxWxH) |
approx. 8x6x3cm |
| Weight |
approx. 100g |
| Color |
black |
| Material |
plastic |
| Set |
|
| Range |
approx. 15m |
| Length of the Cable |
approx. 0,8m |